5dafd4a183d42
5dafd49e19a02
넳 넲

C-Auto Feed Pipe Beveling Mchine

C-Auto Feed Pipe Beveling Mchine Specially designed for narrow workspaces and small diameter pipeline end face bevel machining. Using external card positioning installation, different specifications of tensioning blocks can adapt to different pipe diameters, making alignment more precise and clamping more stable. Its structure is more compact and easy to operate, widely used in industries such as water-cooled walls, boiler fins, economizers, superheaters, reheaters, power plants, etc

Product Introduction

 

The C-I type external card pipe end beveling machine is designed for the machining of small diameter pipe end faces in narrow workrooms. Adopting external card positioning installation, different specifications of tensioning blocks are adapted to different pipe diameters, with more precise centering and more stable clamping. Its structure is more compact and easy to operate. It is widely used in industries such as water-cooled walls, boiler fins, economizers, superheaters, reheaters, power plants, etc., and is used for bevel machining of single and row pipes.


Product features


1. Wide range of processing pipe diameters;
2. Aluminum alloy body, suitable for high-altitude operations;
3. Positioning and installation of the outer wall of the pipe, automatic centering, and manual feeding;
4. Optional special cutting tools can be used to machine internal threaded pipes;
5. There are two driving modes available: electric and pneumatic;

 

Processing function


1. Pipe end groove; 2. Flat end of pipe; 3. Inner groove
Slope type:

Technical parameters:

Driving method outside diameter wall thickness Feed stroke speed Minimum pipe length
electric pneumatic OD mm mm mm rpm mm
ISC-53 TSC-53 Ф8～53 ≤8 11 0-58 ≥60
ISC-63 TSC-63 Ф20～63 ≤12 11 0-55 ≥70
ISC-73 TSC-73 Ф25～73 ≤12 11 0-54 ≥70
ISC-83 TSC-83 Ф30～83 ≤12 11 0-43 ≥70
ISC-108 TSC-108 Ф50～108 ≤12 11 0-42 ≥70

*The relevant technical parameters are for reference only and do not serve as the final delivery standard

Tighten the clamp

 model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
ISC-53 Φ8 Φ10 Φ12 Φ14 Φ16 Φ18 Φ20 Φ22 Φ25 Φ28 Φ32 Φ38 Φ42 Φ44.5 Φ48 Φ51 Φ53
ISC-63 Φ20 Φ22 Φ25.4 Φ28 Φ32 Φ38 Φ42 Φ44.5 Φ48 Φ51 Φ54 Φ57 Φ60 Φ63      
ISC-73 Φ25.4 Φ28 Φ32 Φ38 Φ42 Φ44.5 Φ48 Φ51 Φ57 Φ60 Φ63 Φ68 Φ70 Φ73      
ISC-83 Φ25.4 Φ28 Φ32 Φ38 Φ42 Φ44.5 Φ48 Φ51 Φ57 Φ60 Φ63 Φ68 Φ70 Φ73 Φ76 Φ83  
ISC-108 Φ50 Φ54 Φ57 Φ60 Φ63 Φ68 Φ70 Φ73 Φ76 Φ83 Φ89 Φ95 Φ108        

One specification of tightening clamp is compatible with a unique pipe diameter, and four specifications of tightening clamp are randomly equipped as standard. If you need more specifications, please declare before purchasing

Driving method:

Electric type: convenient source supply, stable performance, widely used; Power requirements: 220-230V, 1PH, 50/60Hz; Power: 1.43KW
Pneumatic: Safe and explosion-proof, stable performance, and easy maintenance; Gas source requirement: 1500-2000L/ min@0.63-0.8Mpa ; Power: 2HP
 
         
             
             
             
             
             
             

 
ꄴPrevious： null
ꄲNext： C-II Auto Feed Pipe Beveling Mchine