Pipe Beveling Machine-II

Type II - Internal Expansion Pipe Beveling Machine, designed with an automatic cutting and dragging plate mechanism, with adjustable groove angles within a range; Suitable for groove processing of thick walled pipes, and can also perform cutting groove processing on welded convex and flat flanges. Its design is clever, the cutting amount can be fine tuned, and the manual and automatic feeding methods can be freely switched. The inner diameter of the pipe is installed, making it a movable and powerful pipe end beveling machine tool suitable for beveling various grades of carbon steel, stainless steel, alloy steel and other metal materials and special hard engineering materials. It is widely used in heavy pipe installation and pipeline repair operations in industries such as petroleum, chemical, natural gas, nuclear power, etc

• Model: GC-2
  Scope: Ф 80-820mm
  Process: Pipe end groove
  Drive: pneumatic, electric
  Label: Portable Beveling Machine, Pipe Beveling Machine, Pipe End Beveling Machine, Internal Expansion Beveling Machine, Pneumatic Beveling Machine, Electric Beveling Machine
•  

• Product Introduction

• 
  Type II - Internal Expansion Pipe Beveling Machine, designed with an automatic cutting and dragging plate mechanism, with adjustable groove angles within a range; Suitable for groove processing of thick walled pipes, and can also perform cutting groove processing on welded convex and flat flanges. Its design is clever, the cutting amount can be fine tuned, and the manual and automatic feeding methods can be freely switched. The inner diameter of the pipe is installed, making it a movable and powerful pipe end beveling machine tool suitable for beveling various grades of metal materials such as carbon steel, stainless steel, alloy steel, and special hard engineering materials. It is widely used in heavy-duty pipe installation and pipeline repair operations in industries such as petroleum, chemical, natural gas, nuclear power, etc. 

• 
  Product features

• 
  1. The cutting amount can be fine tuned;

• 2. Adjustable groove angle: 0 ° -37 °;
  3. Complete cold cutting without changing the material of the pipe;
  4. There are two feeding methods for manual and automatic feeding, with free switching;
  5. Machinable groove forms: "U" single "V" double "V" and "J" shapes;
  6. Processing range: Different specifications of pipes with inner diameters ranging from 80mm to 820mm are available for selection;
  7. There are two driving modes available: pneumatic or electric;

• 
  Processing steps:

• 
  1. The outer slope of the pipe end; 2. Internal groove at the pipe end; 3. Flat end of pipe; 4. Composite groove; 5. Flange face

• Model	working range	Wall thickness	speed	power
  250-2	80-240mm	≤75mm	16rpm	1.43kw
  350-2	150-330mm	≤75mm	10rpm	1.43kw
  457-2	250-430mm	≤75mm	9rpm	1.43kw
  630-2	300-600mm	≤75mm	8rpm	2kw
  850-2	600-820mm	≤75mm	7rpm	2kw